Stratasys uPrint, Service Manual, Page: 150 / 383

uPrint/uPrint SE Service Manual 4-103
Y Motor Belt
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
• Dial indicator and belt tension gauge assembly
Hardware
• 10-32 x
3
⁄
8
” slotted screws (x30)
• 3-16 x 1” fender washer
Removing the Y Motor Belt
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Remove the upper electronics bay cover. See Removing the upper electronics bay cover
on page 4-17.
4.
Remove the left side access panel. See Figure 4-175.
Figure 4-175: Left side access panel mounting screw locations
Remove the 7
mounting
screws.