Stratasys uPrint, Service Manual, Page: 64 / 383

uPrint/uPrint SE Service Manual 4-17
Upper Electronics Bay Cover
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
Hardware
• 10-32x
3
⁄
8
” slotted screws (x4)
Removing the upper electronics bay cover
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Using a
5
⁄
16
” nut driver or standard screwdriver, loosen but do not remove the top left
and right mounting screws. See Figure 4-35.
Figure 4-35: Upper electronics bay cover top mounting screw locations
4.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the bottom left and right
mounting screws. See Figure 4-36.
Loosen but do not
remove the 2
mounting screws