Stratasys uPrint, Service Manual, Page: 41 / 383

3-6
MaracaEX Help
Overview
MaracaEX is a program used for machine configuration and troubleshooting. It is intended
for use by trained service personnel only.
Using MaracaEX you can select a modeler to work with, modify machine-specific
configuration parameters, download new calibration file data, download new test parts, and
test the machine's operation.
• Select a Modeler
• Modeler States
• Modeler Setup
• MaracaEX Configuration
• Show Machine Status
• Materials
• Tip Offset and Liquefier Calibration
• Gantry
• Temperatures
• Outputs
• Table
Calibration
• Get Calibration
• Send Calibration
• Get Configuration
• Test Parts
• Reset Password
• Connect
Select a Modeler
From the Current Modeler drop down list select a modeler to connect to with MaracaEX. To
add modelers to the list, use the plus button at the bottom of the window.
Modeler States
These three fields provide the current information for the state of the machine:
Caution: It is possible, using this program, to damage the controller software and
make the machine non-functional.
State
The current machine state as reported to CatalystEX status.
Internal State
The current internal software state (e.g. sttIdle)
Home State
The previous internal state in any state that cares about that state.