Stratasys uPrint, Service Manual, Page: 187 / 383

4-140
Installing the right side chamber fan
1.
Align chamber fan with mounting holes.
2.
Using a
5
⁄
16
” box wrench, reinstall the 2 chamber fan mounting screws.
3.
Align the right side heater panel with the mounting holes.
4.
Using a
5
⁄
16
” nut driver or standard screwdriver, reinstall the 4 mounting screws for the
right side heater panel.
5.
Reinstall the side panels. See Installing the side panels on page 4-8.
6.
Reinstall the top panel. See Installing the top panel on page 4-6.
Removing the left side chamber fan
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 4 mounting screws from the
left side heater panel and remove the heater panel. See Figure 4-244.
Figure 4-244: Left side heater panel mounting screw locations
4.
Using a
5
⁄
16
” box wrench, remove the 2 chamber fan mounting screws. See Figure 4-245.
Figure 4-245: Left side chamber fan mounting screw locations
Installing the left side chamber fan
1.
Align chamber fan with mounting holes.
2.
Using a
5
⁄
16
” box wrench, reinstall the 2 chamber fan mounting screws.
3.
Align the left side heater panel with the mounting holes.
4.
Using a
5
⁄
16
” nut driver or standard screwdriver, reinstall the 4 mounting screws for the
left side heater panel.
5.
Reinstall the side panels. See Installing the side panels on page 4-8.
6.
Reinstall the top panel. See Installing the top panel on page 4-6.
Remove the 4
mounting screws
Remove the 2
mounting screws