Stratasys uPrint, Service Manual, Page: 112 / 383

uPrint/uPrint SE Service Manual 4-65
Figure 4-108: Substrate sensor connector location
5.
Using a cutters, cut and remove the wire tie around the head motor. See Figure 4-109.
Figure 4-109: Wire tie location
6.
Using a
3
⁄
32
” allen wrench, remove the 4 substrate sensor mounting screws. See Figure 4-
110.
Figure 4-110: Substrate sensor mounting screw locations
7.
Remove the substrate sensor.
Disconnect the
substrate sensor
Cut and remove
the wire tie from
the head motor
Remove the 4
mounting screws