Stratasys uPrint, Service Manual, Page: 63 / 383

4-16
Figure 4-33: Electronics bay cover mounting screw locations
5.
Gently pull the electronics bay cover down. See Figure 4-34.
Figure 4-34: Electronics bay with cover lowered
Closing the electronics bay
1.
Gently push the electronics bay cover back in to the closed position.
2.
Using a
5
⁄
16
” nut driver or standard screwdriver, reinstall the 3 mounting screws.
3.
Reconnect the filament tubes to the Y connectors.
4.
Reinstall the side panels. See Installing the side panels on page 4-8.
5.
Reinstall the top panel. See Installing the top panel on page 4-6.
Remove the 3
mounting screws