Sharp AR-BC320 Service Manual Download Page 96

Page: 96 / 344

AR-BC320 DESCRIPTIONS OF EACH SECTION 7 - 55

Step 50:

The leading edge of the original advances in
the reverse direction by means of the flapper.

Step 51:

Reverse sensor (DRS) detects the leading
edge of the original.
(DRS output HIGH)

Step 52:

Reverse solenoid (DRSOL) OFF.
(Flapper ascends.)

Step 53:

Transport motor (DTM) OFF.
(Transport belt stops.)

Step 54:

Delivery motor (DEM) OFF.
(Reverse roller stops.)

Step 55:

Transport motor (DTM) reverses direction.
(Transport belt rotates.)

Step 56:

Delivery motor (DEM) forward rotation.
(Reverse roller rotates.)
Original is transported toward the paper feed
section.

Step 57:

Document exit sensor (DES) detects the
trailing edge of the reversed original.
(DES output LOW)

Step 58:

Reverse sensor (DRS) detects trailing edge of
the reversed original.
(DRS output LOW)

Step 59:

Delivery motor (DEM) OFF.
(Reverse roller stops.)

Step 60:

Transport motor (DTM) OFF.
(Transport belt stops.)

Step 61:

Transport motor (DTM) and delivery motor
(DEM) forward rotation.
(Transport belt and reverse roller rotate.)
Original discharge starts.

Step 50

Step 51

Step 52

Step 53

Step 54

Step 55

Step 56

Step 57

Step 58

Step 59

Step 60

Step 61

Summary of Contents for AR-BC320

























































































































































































































































































































































Search results

Summary of Contents for AR-BC320

Reviews:

Sharp AR-BC320, Service Manual, Page: 96 / 344

Search results

Summary of Contents for AR-BC320

Reviews: