Sharp AR-BC320, Service Manual, Page: 212 / 344

AR-BC320 SIMULATION 9 - 58
C: Filter setup in 1bit Text/Photography mode
D: Filter setup in 1bit Photography mode
1. Select the print density adjustment mode with the scroll key.
2. Enter the adjustment value with the 10-key, and press [OK]
key.
The adjustment value is set.
3. Set the print condition with the scroll key and the 10-key.
4. Set a document and press [EXECUTE] key.
The document is scanned at the density level set in procedure 2
and it is printed.
(Item to be set)
*1
: 1: MFT 2: CS1 3: CS2 4: CS3 5: CS4 6: LCC
*2
: 1: R 2: S
2. Enter the adjustment value with the 10-key, and press [OK] key.
The adjustment value is set.
3. Set the print condition with the scroll key and the 10-key.
4. Set a document and press [EXECUTE] key.
The document is scanned at the density level set in procedure 2
and it is printed.
(Item to be set)
*1 : 1: AUTO 2: LIGHT 3: DARK
*2
: 1: MFT 2: CS1 3: CS2 4: CS3 5: CS4 6: LCC
*3 : 1: R 2: S
2. Enter the adjustment value with the 10-key, and press [OK] key.
The adjustment value is set.
3. Set the print condition with the scroll key and the 10-key.
4. Set a document and press [EXECUTE] key.
The document is scanned at the density level set in procedure 2
and it is printed.
(Item to be set)
*1
: 1: AUTO 2: LIGHT 3: DARK 4: AUTO (HALF TONE)
5: LIGHT (HALF TONE) 6: DARK (HALF TONE)
*2
: 1: MFT 2: CS1 3: CS2 4: CS3 5: CS4 6: LCC
*3
: 1: R 2: S
Input value Selection display text Filter setting
0 OFF Emphasis strong
1 ON Emphasis weak
Input value Selection display text Filter setting
0 OFF Emphasis strong
1 ON Emphasis weak
46 -40
Purpose Adjustment
Function
(Purpose) Collective adjustment of FAX mode (all modes)
document scan density (when FAX is installed)
Section ICU PWB/FAX
Item Picture quality
Operation/
Procedure The print densities of all the modes (FAX modes)
can be collectively and uniformly changed with the
adjusted density level of each mode (normal, fine
text, super fine, ultra fine) as the start point.
Item Set range Default
A AUTO Exposure data value
(Collective) 1 to 99 50
B PAPER Print execution cassette
selection 1 to 6
*1
2
C EXIT TRAY Paper exit tray selection 1 to 2 *2 2
46 -41
Purpose Adjustment
Function
(Purpose) Used to adjust the FAX mode (normal mode)
document scan density (when the FAX is installed).
Section ICU PWB/FAX
Item Picture quality
Operation/
Procedure 1. Select the print density adjustment mode with the
scroll key.
Item
Set range Default
A AUTO Automatic 1 to 99 50
B LIGHT Light 1 to 99 50
C DARK Dark 1 to 99 50
D EXECUTE MODE Print mode 1 to 3 *1 1
E PAPER Print execution
cassette selection 1 to 6
*2
2
F EXIT TRAY Paper exit tray
selection 1 to 2
*3
1
46
-42
Purpose Adjustment
Function
(Purpose) Used to adjust the FAX mode (fine text mode)
document scan density (when the FAX is installed).
Section ICU PWB/FAX
Item Picture quality
Operation/
Procedure 1. Select the print density adjustment mode with the
scroll key.
Item Set range Default
A AUTO Fine text/ Auto/
Without half-tone 1 – 99 50
B LIGHT Fine text/ Light/
Without half-tone 1 – 99 50
C DARK Fine text/ Dark/
Without half-tone 1 – 99 50
D AUTO
(HALF TONE) Fine text/ Auto/
With half-tone 1 – 99 50
E LIGHT
(HALF TONE) Fine text/ Light/
With half-tone 1 – 99 50
F DARK
(HALF TONE) Fine text/ Dark/
With half-tone 1 – 99 50
G EXECUTE
MODE Print mode 1 – 6
*1
1
H PAPER Print execution
cassette selection 1 – 6
*2
2
I EXIT TRAY Paper exit tray
selection 1 – 2 *3 1