manualshive.com logo in svg

Sharp AR-BC320, Service Manual, Page: 25 / 344

Share
Download
Sharp AR-BC320 Service Manual Download Page 25

AR-BC320  UNPACKING AND INSTALLATION  5 - 3

Fixing tape and protection pads removal

1) Remove the fixing tape and protection pads from the machine.

Note: The document cover may be supplied as a standard part in

some destinations, and may be an option in some other des-
tinations.

2) Open the left door, and remove the transfer fixing pads.

Actuator installation

1) Remove the actuator fixed to the left door.

2) Install the actuator to the paper exit port of the left door. 

4. Lock release

A. Scanner (2/3 mirror unit) lock release

1) Remove the scanner fixing screw, and remove the caution

label.

B. Main body cassette lock release

1) Pull out the main body cassette.

2) Remove the rotation plate fixing pad and remove the caution

label.

C. Transfer unit pressure release

1) Pull the knob and open the left door.

1

1

1

1

1

1

1

1

1

3

2

1

2

3

Summary of Contents for AR-BC320

























































































































































































































































































































































Reviews:

No comments