Sharp AR-BC320, Service Manual, Page: 338 / 344

AR-BC320 OTHERS 15 - 11
51 1 Transfer voltage timing
setup A: For paper lead edge (Except for
OHP) 1 to 99 40 EEPROM
(PCU PWB)
B: For the paper rear edge (Except for
OHP) 1 to 99 60
C: For paper lead edge (OHP) 1 to 99 40
D: For the paper rear edge (OHP) 1 to 99 60
2 Paper resist quantity
adjustment A: Cassette tray resist adjustment value 1 to 99 15 EEPROM
(PCU PWB)
B: LCC tray (LC8)/deflection adjustment
value 1 to 99 10
C: ADU resist adjustment value 1 to 99 30
D: Manual feed tray resist adjustment
value (Normal paper, small size) 1 to 99 50
E: Manual feed tray resist adjustment
value (Heavy paper 1) 1 to 99 50
F: Manual feed tray resist adjustment
value (Heavy paper 2) 1 to 99 50
G: Manual feed tray resist adjustment
value (OHP 1) 1 to 99 50
H: Manual feed tray resist adjustment
value (OHP 2) 1 to 99 50
I: Manual feed tray resist adjustment
value (Envelope) 1 to 99 50
J: Desk tray resist adjustment value
(Small size) 1 to 99 30
K: Desk tray resist adjustment value
(Large size) 1 to 99 30
L: Manual feed tray resist adjustment
value (Normal paper, large size) 1 to 99 75
M: Cassette tray deflection adjustment
value (Large size) 1 to 99 25
N: ADU deflection adjustment value
(Large size) 1 to 99 30
O: LCC tray (LC5)/deflection
adjustment value 1 to 99 25
52 1 ADU middle tray
alignment plate
adjustment A: Manual feed tray 0 to 99 50 EEPROM
(PCU PWB)
B: Tray 1 0 to 99 50
C: Tray 3 0 to 99 50
D: Tray 4 0 to 99 50
E: LCC 0 to 99 50
53 1 RADF stop position
adjustment A: Normal paper (single) 1 to 15 8 EEPROM
(RADF
CONTROL
PWB)
B: Normal paper (duplex) 1 to 15 8
61 4 LED position adjustment
(Self print) A: Print pattern specification 1/2 1
B: Dot print width (N-1) specification 1 to 10 7
C: Pattern output area selection 1 to 12 6
D: Print quantity 1 to 999 1
E: Paper feed tray selection 1 to 6 2 1: MFT
2: CS1
3: CS2
4: CS3
5: CS4
6: LCC
F: Paper exit tray selection 1/2 1 1: R, 2: S
Simulation
Code
Content/Item Set range Default NOTE
Data store
location
Main Sub.