Sharp AR-BC320, Service Manual, Page: 213 / 344

AR-BC320 SIMULATION 9 - 59
2. Enter the adjustment value with the 10-key, and press [OK]
key.
The adjustment value is set.
3. Set the print condition with the scroll key and the 10-key.
4. Set a document and press [EXECUTE] key.
The document is scanned at the density level set in procedure 2
and it is printed.
(Item to be set)
*1
: 1: AUTO 2: LIGHT 3: DARK 4: AUTO (HALF TONE)
5: LIGHT (HALF TONE) 6: DARK (HALF TONE)
*2
: 1: MFT 2: CS1 3: CS2 4: CS3 5: CS4 6: LCC
*3
: 1: R 2: S
2. Enter the adjustment value with the 10-key, and press [OK] key.
The adjustment value is set.
3. Set the print condition with the scroll key and the 10-key.
4. Set a document and press [EXECUTE] key.
The document is scanned at the density level set in procedure 2
and it is printed.
(Item to be set)
*1
: 1: AUTO 2: LIGHT 3: DARK 4: AUTO (HALF TONE)
5: LIGHT (HALF TONE) 6: DARK (HALF TONE)
*2
: 1: MFT 2: CS1 3: CS2 4: CS3 5: CS4 6: LCC
*3
: 1: R 2: S
a. Sub scanning direction magnification ratio adjustment: By
changing the scanning speed in the paper transport direction,
the print magnification of images in the paper transport
direction is adjusted.
[Adjustment range]: 35 – 99 (Default: 50)
b. Main scanning direction magnification ratio adjustment. The
print magnification ratio in the vertical direction of images
(vertical to the paper transport direction) is adjusted by
software in the (F/R) image process section.
[Adjustment range]: 1 – 99 (Default: 50)
46
-43
Purpose Adjustment
Function
(Purpose) Used to adjust the FAX mode (super fine mode)
document scan density (when the FAX is installed).
Section ICU PWB/FAX
Item Picture quality
Operation/
Procedure 1. Select the print density adjustment mode with the
scroll key.
Item Set range Default
A AUTO Super fine/ Auto/
Without half-tone 1 – 99 50
B LIGHT Super fine/ Light/
Without half-tone 1 – 99 50
C DARK Super fine/ Dark/
Without half-tone 1 – 99 50
D AUTO
(HALF TONE) Super fine/ Auto/
With half-tone 1 – 99 50
E LIGHT
(HALF TONE) Super fine/ Light/
With half-tone 1 – 99 50
F DARK
(HALF TONE) Super fine/ Dark/
With half-tone 1 – 99 50
G EXECUTE
MODE Print mode 1 – 6
*1
1
H PAPER Print execution
cassette selection 1 – 6 *2 2
I EXIT TRAY Paper exit tray
selection 1 – 2
*3
1
46
-44
Purpose Adjustment
Function
(Purpose) Used to adjust the FAX mode (ultra-fine mode)
document scan density (when the FAX is installed).
Section ICU PWB/FAX
Item Picture quality
Operation/
Procedure 1. Select the print density adjustment mode with the
scroll key.
Item Set range Default
A AUTO Ultra-fine/ Auto/
Without half-tone 1 – 99 50
B LIGHT Ultra-fine/ Light/
Without half-tone 1 – 99 50
C DARK Ultra-fine/ Dark/
Without half-tone 1 – 99 50
D AUTO
(HALF TONE) Ultra-fine/ Auto/
With half-tone 1 – 99 50
E LIGHT
(HALF TONE) Ultra-fine/ Light/
With half-tone 1 – 99 50
F DARK
(HALF TONE) Ultra-fine/ Dark/
With half-tone 1 – 99 50
G EXECUTE
MODE Print mode 1 – 6
*1
1
H PAPER Print execution
cassette selection 1 – 6 *2 2
I EXIT TRAY Paper exit tray
selection 1 – 2
*3
1
48
48 -1
Purpose Adjustment
Function
(Purpose) Used to adjust the copy magnification ratio (main
scanning and sub scanning directions).
Item Picture quality Size/magnification ratio
Operation/
Procedure 1. Select the adjustment mode with the scroll key.
2. Enter the adjustment value with the 10-eky and
press the [OK] key to set the entered value.