Sharp AR-BC320, Service Manual, Page: 80 / 344

AR-BC320 DESCRIPTIONS OF EACH SECTION 7 - 39
<2> FD paper exit unit
1) Remove the rear cabinet, the rear cabinet upper, the left cabi-
net, the rear left cabinet lid, the rear left cabinet, and the front
cabinet upper.
2) Remove the motor unit.
3) Slide section (A) to the front side. Remove the screw, and dis-
engage the pawl in section (B). Remove the FD paper exit unit
(C) from the rear side and remove the connector.
∗
When assembling, attach from the front side.
∗
When assembling, be careful not to damage the actuator
(D).
<3> FD paper exit roller B
1) Remove the cabinet.
2) Remove the paper exit unit.
3) Remove the E-ring, the bearing, and the gear. Remove the FD
paper exit roller.
<4> FD paper exit roller A
1) Remove the cabinet.
2) Remove the paper exit unit.
3) Remove the E-ring, (A), the screw, (B), (C), and the bearing.
Remove the unit (D).
4) Remove the E-ring and the bearing, and remove the FD paper
exit roller (A).
e. Gate solenoid unit
1) Open the left door, and remove the rear cabinet and the rear
left cabinet.
2) Remove the driver PWB unit.
3) Remove the connector and the screw, and remove the gate
solenoid unit.
f. Lift-up unit
1) Remove the rear cabinet and the rear right cabinet.
2) Remove the power PWB unit.
3) Remove the connector and the screw, and remove the lift-up
unit.
A
C
D
B
A
C
D
B