Sharp AR-BC320, Service Manual, Page: 188 / 344

AR-BC320 SIMULATION 9 - 34
(Counters to be cleared)
(Counters to be cleared)
After replacement of the OPC drum, the following counters are
cleared.
(Counters to be cleared)
∗
The transfer unit is installed to the machine.
∗
All the cabinet open/close detection switches are ON.
1. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
2. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
After removing waste toner from the transfer section, the counter
is cleared.
24 -4
Purpose Data clear
Function
(Purpose) Used to reset the maintenance counter.
Item Counter Maintenance
Operation/
Procedure 1. Press the [EXECUTE] key. The display for
reconfirmation to clear is shown.
2. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
MAINTE (COL) Maintenance counter (Color)
MAINTE (ALL) Maintenance counter (Total)
BELT UNIT Transfer unit print counter
FUSER UNIT Fusing unit print counter
24 -6
Purpose Data clear
Function
(Purpose) Used to clear the counters.
Item Counter
Operation/
Procedure 1. Select the counter to be cleared.
2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
3. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
Display Content
COPY BW Copier (B/W) counter
COPY COL Copier (Color) counter
SINGLE COLOR Single color
24 -7
Purpose Data clear
Function
(Purpose) Used to clear the OPC drum (membrane decrease)
correction counter. (This simulation is performed
with the OPC drum is replaced.)
Section Process (Photoconductor,
developing, transfer, cleaning) Photoconductor
Item Counter Photoconductor
Operation/
Procedure 1. Select the counter to be cleared.
2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
Display Content
DRUM CTRG K Drum cartridge (K)
DRUM CTRG C Drum cartridge (C)
DRUM CTRG M Drum cartridge (M)
DRUM CTRG Y Drum cartridge (Y)
24 -8
Purpose Data clear
Function
(Purpose) Used to clear the waste toner counter in the transfer
section.
Section Process (Photoconductor, developing,
transfer, cleaning) Transfer
Item Counter
Operation/
Procedure In order to execute this simulation, the following
conditions must be satisfied. Be sure to check them
in advance.
24 -9
Purpose Data clear
Function
(Purpose) Used to clear the printer mode counter and the self-
print mode print counter. (After completion of
maintenance, the counters are cleared.)
Section Printer
Item Counter Printer
Operation/
Procedure 1. Select the counter to be cleared.
2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
3. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
PRINT BW Printer mode print counter (B/W)
PRINT COL Printer mode print counter (Color)
OTHER BW Self print mode print counter (B/W)
OTHER COL Self print mode print counter (Color)