Sharp AR-BC320 Service Manual Download Page 101

Page: 101 / 344

AR-BC320 DESCRIPTIONS OF EACH SECTION 7 - 60

a-2. Original transport belt disassembly

1) Remove the original transport belt unit.

2) Remove the screws, and release the original transport belt

unit tension.

3) Raise (A) the belt tension bracket.

4) Remove (B) the original transport belt.

• Caution when mounting

The belt should not ride on top of the frame.

[Sensor section]

: Check (Clean, replace, or adjust as necessary.)

❍

: Clean

▲

: Replace

∆

: Adjust

✩

: Lubricate

❏

: Shift position

a. Resist sensor and timing sensor

1) Open (A) the document feed cover.

2) Open the reverse cover.

3) Remove the screws.

4) Remove the rear cover.

5) Remove the screws.

6) Remove (B) the transport guide.

Part name

When

calling

50K

100K

150K

200K

250K

300K

350K

400K

Remarks

Sensor section

Resist sensor and mirror

❍

Timing sensor and mirror

❍

Reverse sensor and mirror

❍

Summary of Contents for AR-BC320

























































































































































































































































































































































Search results

Summary of Contents for AR-BC320

Reviews:

Sharp AR-BC320, Service Manual, Page: 101 / 344

Search results

Summary of Contents for AR-BC320

Reviews: