Sharp AR-BC320, Service Manual, Page: 221 / 344

AR-BC320 SIMULATION 9 - 67
(Items to be set)
1. Select the color to be set with the color keys (CMY).
2. The display page can be shifted with the scroll key.
TRAYVOLMAX Tray paper
max. width
detection
After selecting
TARYVOLMAX, set the tray
document guide to the
maximum width position, and
press the [EXECUTE] key.
TRAYVOLB5 Tray B5 width
detection After selecting TARYVOLB5,
set the tray document guide
to the A4R (11 x 8.5R) width
position, and press the
[EXECUTE] key.
60
60 -01
Purpose Operation test/check
Function
(Purpose) Used to check the operation of ICU PWB image
DRAM read/write.
Section ICU (Memory)
Item Operation
Operation/
Procedure Press the [EXECUTE] key, and memory read/write
operation check is started.
After completion of check, the result is displayed
with NG or OK.
61
61 -04
Purpose Adjustment
Function
(Purpose) Used to adjust the scanner (writing) unit (LED array
unit) skew.
Section Scanner (writing)
Item Operation
Operation/
Procedure 1. Set the print conditions of the scanner (writing)
unit (LED array unit) skew adjustment pattern.
2. Press the [EXECUTE] key.
The scanner (writing) unit (LED array unit) skew
adjustment pattern is printed.
Display Content
Min.
Value
Max.
Value
Default
A PATTERN Print pattern specification
1: SKEW--- Used to
check scan tilt.
2: FOCUS --- Used to
check/adjust focus.
1 2 1
B LINE
PITCH
Dot print width (N-1)
specification 1 10 7
Display Content Note
C POSITION Pattern output area
selection
1 12 6
D MULTI
COUNT
Print quantity 1 999 1
E PAPER Paper feed tray selection
(MFT, CS1,CS2, CS3,
CS4, LCC) 1 6 2
(CS1)
F EXIT
TRAY
Paper exit tray selection
(R, S) 1 2 1 (R)
63
63 -01
Purpose Adjustment/Setting/Operation data output, check
(display, print)
Function
(Purpose) Used to check the result of shading correction. (The
shading correction data are displayed.)
Section Scanner (Exposure)
Item Operation
Operation/
Procedure Used to display the latest shading correction result.
Data for each color can be separately checked with
the color keys.
63 -03
Purpose Adjustment
Function
(Purpose) Used to adjust the CCD color balance (gamma).
Section Scanner (Image scanning)
Item Picture quality Color balance
Operation/
Procedure Set the SIT chart (UKOG-0280FCZZ) on the
document table, and press the [EXECUTE] key.
The color coefficient automatic adjustment pattern
reading is started to calculate and display the color
coefficient data.
The color coefficient data of each color can be
displayed with the color key.
Display Content
Min.
Value
Max.
Value
Default