Sharp AR-BC320, Service Manual, Page: 169 / 344

AR-BC320 SIMULATION 9 - 15
66 19 Used to write the ICU PWB
SRAM contents (various set
values and user data) into the
Flash ROM (AR-MM9).
(When the FAX is installed.) Backup FAX Data
20 Used to write the Flash ROM
(AR-MM9) contents (SRAM
contents written with SIM 66-19)
into the ICU PWB SRAM.
(When the FAX is installed.) Backup FAX Data
21 Used to print various registration
information, communication, file
management, system error, and
protocol information.
(When the FAX is installed.) Check FAX Data
22 Used to set the sound volume of
the handset.
(When the FAX is installed.) Setting FAX Operation
23 Used to download the FAX
program.
(When the FAX is installed.) Setting FAX Operation
24 Used to clear the data in the
FAST memory.
(When the FAX is installed.) Data clear FAX Data Initializing
29 Used to clear the data related to
the address book (one-touch
registration, program
registration/expansion, interface
memory box registration, each
table contents).
(When the FAX is installed.) Data clear FAX Data Initializing
30 Used to check the status change
of the TEL/LIU sensor.
(When the FAX is installed.) Operation test/
check FAX Operation
31 Used to set ON/OFF of each
port for output to the TEL/LIU.
(When the FAX is installed.) Setting FAX Operation
32 Used to check (compare) the
received data (fixed data) from
the line to make judgment of
error or normal.
(When the FAX is installed.) Operation test/
check FAX Operation
33 Used to detect signals (BUSY
TONE/CNG/CED/FNET) from
the line.
(When the FAX is installed.) Operation test/
check FAX Operation
34 Used to display the time
required for sending the test
image data.
(When the FAX is installed.) Operation test/
check FAX Operation
35 Used to rewrite the Modem
program.
(When the FAX is installed.) Setting FAX Data Writing
36 Used to check send/receive
(data/command line) from the
Modem controller to the MFP
controller.
(When the FAX is installed) Operation test/
check FAX Operation
39 Used to set the destination of
the FAX.
(When the FAX is installed.) Setting FAX Specifications
42 PIC program rewriting
(When the FAX is installed.) Setting FAX Operation
43 PIC adjustment value writing
(When the FAX is installed.) Setting FAX Operation
60 ACR data registration Setting FAX Operation
Code
Function (Purpose) Purpose Section Item
Main Sub