manualshive.com logo in svg

Sharp AR-BC320, Service Manual, Page: 103 / 344

Share
Download
Sharp AR-BC320 Service Manual Download Page 103

AR-BC320  DESCRIPTIONS OF EACH SECTION  7 - 62

[Main parts and others]

a. Original platform section

a-1. Original platform unit disassembly

1) Remove the screw, and remove (A) the rear subcover.

2) Detach the connector.

3) Remove the screws, and remove (B) the document feed tray.

4) Detach the connector.

5) Remove the screws, and take out the original width volume

unit.

6) Remove the screws, and detach (A) the original width volume.

a-2. Original length sensor disassembly

1) Remove the document feed tray.

2) Detach the connector.

3) Remove (A) original length sensor 1 and (B) original length

sensor 2.

b. Document feed section

b-1. Empty sensor disassembly

1) Open (A) the document feed cover.

2) Remove the screws.

3) Remove (B) the transport guide.

4) Detach the connector.

5) Remove (C) the empty sensor.

b-2. Front open sensor disassembly

1) Remove the screws.

2) Detach the connector, and remove (A) the front cover.

B

A

A

A

B

A

B

C

A

Summary of Contents for AR-BC320

























































































































































































































































































































































Reviews:

No comments