Sharp AR-BC320, Service Manual, Page: 195 / 344

AR-BC320 SIMULATION 9 - 41
0: Disable. Easy calibration, test print, and color balance can be
performed in the color adjustment of key operation printer
setting.
1: Enable. Only auto color calibration can be performed in the
color adjustment of key operation printer setting.
Note: Selection of the adjustment with SIM 67-24 and the conven-
tional user color balance adjustment (key operation). (0 =
conventional user color balance adjustment, 1 = adjustment
with SIM 67-24)
Only in the adjustment with SIM 67-24, the printer half-tone
process control is enabled.
This function is used to select the user color balance
adjustment (key operation) when the user wants to adjust
manually by himself.
∗
When set to 1 (Enable), the check box of "Black/White copy
document feeder unit high image quality mode" is displayed in
the key operation of [Function Setting], and setting is allowed.
When a check is made in the check box, the operation is made
in the high image quality mode (600 dpi) in Black/White copy
with the document feeder unit.
(Set value)
26 -54
Purpose Setting
Function
(Purpose) Used to set enable/disable of auto color calibration
for the printer.
Item Specifications Operation mode
Operation/
Procedure 1. Select Enable or Disable with the 10-key.
Disable 0: YES
Enable 1: NO
2. Press the [OK] key.
Set
value
Content Default
0 Disable auto color calibration (automatic
adjustment of printer color balance and density) 1
1 Enable auto color calibration (automatic
adjustment of printer color balance and density)
26 -57
Purpose Setting
Function
(Purpose) Used to set the model name for use as the status
information.
Item Specifications
Operation/
Procedure Press the corresponding key to the model name,
and the model name is set and the selected key is
highlighted. The model name information set in this
simulation is used in the RIC/MIB system.
Model Default
AR-BC320 For USA/Canada
AR-C262M Except for USA/Canada
26 -65
Purpose Setting
Function
(Purpose) Used to set the finisher alarm mode.
Item Specifications
Operation/
Procedure Press the key which shows the staple limit quantity.
The entered number is set and the pressed key is
highlighted.
Item Content Set value Default
STAPLE
LIMIT Staple limit
quantity 30 Staple limit quantity: 30 30
50 Staple limit quantity: 50
26 -69
Purpose Setting
Function
(Purpose) Used to set the operation specifications in case of
toner cartridge life near end.
Item Specifications
Operation/
Procedure 1. Enter the value corresponding to the operation
specification by the 10-key, and press [OK] key.
Item Content Set value Default
A 0: CONTINUE
1: STOP
Used to set
whether
print/copy is
enabled or
not when
the toner
cartridge life
reaches the
near end. 1 Print/copy is
inhibited when the
toner cartridge life
reaches the near
end.
1: UK
0 Print/copy is
enabled until the
toner cartridge life
reaches the end.
0: Other
than UK
26 -72
Purpose Setting
Function
(Purpose) Used to set disable/enable of the high image quality
mode in BW copy.
Item Specifications Operation mode
Operation/
Procedure 1. Enter the set value with the 10-key, and press
the [OK] key.
Item Content Set range Default
A (0:YES
1:NO)
High image quality mode
disable/enable setting 0 – 1 1: Enabled