manualshive.com logo in svg

Sharp AR-BC320, Service Manual, Page: 86 / 344

Share
Download
Sharp AR-BC320 Service Manual Download Page 86

AR-BC320  DESCRIPTIONS OF EACH SECTION  7 - 45

(2) Maintenance parts and major parts replacement

a. Ozone filter

1) Remove the ozone filter cover, and remove the ozone filter.

b. Sub ozone filter

1) Remove the sub ozone filter cover, and remove the sub ozone

filter.

c. PWB

<1> PCU PWB

1) Remove the rear cabinet.

2) Remove the connector and the screw, and remove the PCU

PWB.

<2> High voltage MC power PWB

1) Remove the rear cabinet.

2) Remove the connector, the screw, and the earth wire (com-

monly fixed), and remove the PCU PWB unit.

3) Remove the connector and the screw, and remove the high

voltage MC power PWB.

<3> Power PWB

1) Remove the rear cabinet and the DC power CFM unit.

2) Remove the connector and the screw, and remove the power

PWB.

<4> Driver PWB

1) Remove the rear cabinet, the rear left cabinet lid, and the rear

left cabinet.

2) Remove the screw and the connector, and remove the driver

PWB.

<5> AC PWB

1) Remove the screw, the rear cabinet, the rear left cabinet lid,

and the rear left cabinet. 

2) Remove the screw and the harness, and remove the driver

PWB unit.

3) Remove the harness and remove the AC PWB from the sup-

porter.

Summary of Contents for AR-BC320

























































































































































































































































































































































Reviews:

No comments