manualshive.com logo in svg

Sharp AR-BC320, Service Manual, Page: 67 / 344

Share
Download
Sharp AR-BC320 Service Manual Download Page 67

AR-BC320  DESCRIPTIONS OF EACH SECTION  7 - 26

2) Remove the screw and the dark box cover (A). Remove the

connector, the screw, and the CCD unit (B).

c. Lamp unit

1) Shift the lamp unit to the position shown below. Loosen the

screw and remove the wire.

2) Rotate the lamp unit and lift it, and remove the harness holder

and the harness. Remove the lamp unit.

d. Xenon lamp

1) Remove the lamp unit.

2) Remove the harness and the screw, and remove the Xenon

lamp.

e. Scanner motor

1) Remove the upper cabinet rear unit.

2) Remove the connector, the screw, and the belt. Remove the

motor.

f. MHPS

1) Remove the upper cabinet rear unit.

2) Remove the screw and remove the upper cabinet left.

Remove the screw and the connector, and remove the MHPS.

B

A

Summary of Contents for AR-BC320

























































































































































































































































































































































Reviews:

No comments