Sharp AR-BC320 Service Manual Download Page 91

Page: 91 / 344

AR-BC320 DESCRIPTIONS OF EACH SECTION 7 - 50

Step 28:

Copier mirror base scanning stops.

(Single-side discharge)

*C For step feed operation, only when feeding a second

original, go to step 16.

Step 29:

Transport motor (DTM) and delivery motor
(DEM) forward rotation.
(Transport belt and reverse roller rotate.)
Original discharge starts.

Step 30:

Document feed motor (DFM) reverse rotation.
(Resist rollers rotate.)
The original is sent to the transport section.

Step 31:

Document exit sensor (DES) detects leading
edge of discharged original.
(DES output HIGH)

Step 32:

Original timing sensor (TIMS) detects trailing
edge of original.
(TIMS output LOW)

Step 33:

Document feed motor (DFM) OFF.
(Resist rollers stop.)

Step 34:

Transport motor (DTM) OFF.
(Transport belt stops.)
Original stops.

Step 35:

Copier mirror base scanning starts.

Step 36:

Delivery motor (DEM) rpm decrease.

Step 37:

Document exit sensor (DES) detects trailing
edge of discharged original.
(DES output LOW)

Step 38:

Delivery motor (DEM) OFF.
(Reverse roller stops.)
The original is discharged.

*B <EMPS output>

LOW (original in tray)

→

Go to step 22 (preliminary
feed)

HIGH (no original in tray)

→

Continue as follows.

Step 39:

Transport motor (DTM) and delivery motor
(DEM) forward rotation.
(Transport belt and reverse roller rotate.)

Step 40:

Document exit sensor (DES) detects leading
edge of original.
(DES output HIGH)

Step 41:

Delivery motor (DES) rpm decrease.

Step 29

Step 30

Step 31

Step 32

Step 33

Step 34

Step 36

Step 37

Step 38

Step 39

Step 40

Step 41

Summary of Contents for AR-BC320

























































































































































































































































































































































Search results

Summary of Contents for AR-BC320

Reviews:

Sharp AR-BC320, Service Manual, Page: 91 / 344

Search results

Summary of Contents for AR-BC320

Reviews: