Sharp AR-BC320 Service Manual Download Page 100

Page: 100 / 344

AR-BC320 DESCRIPTIONS OF EACH SECTION 7 - 59

3) Detach the tab, and remove (C) arm F.

4) Remove (D) the pickup roller.

5) Remove (E) the separation roller.

b. Separation pad

1) Open the document feed cover.

b-1. Separation pad disassembly

1) Remove the screws.

2) Press the tab, and remove (A) the forward separation rubber

cover.

3) Remove (B) the separation pad.

[Transport section]

: Check (Clean, replace, or adjust as necessary.)

❍

: Clean

▲

: Replace

∆

: Adjust

✩

: Lubricate

❏

: Shift position

a. Original transport belt

a-1. Original transport belt unit disassembly

1) Loosen the screws.

2) Remove (A) the original transport belt unit.

Part name

When

calling

50K

100K

150K

200K

250K

300K

350K

400K

Remarks

Transport section

Transport belt

(

❍

)

❍

Summary of Contents for AR-BC320

























































































































































































































































































































































Search results

Summary of Contents for AR-BC320

Reviews:

Sharp AR-BC320, Service Manual, Page: 100 / 344

Search results

Summary of Contents for AR-BC320

Reviews: