Sharp AR-BC320, Service Manual, Page: 168 / 344

AR-BC320 SIMULATION 9 - 14
66 3 Used to check the memory on
the Modem controller.
(When the FAX is installed.) Operation test/
check FAX Operation
4 Used to select a signal and send
it to the line and speaker (at the
max. level).
(When the FAX is installed.) Operation test/
check FAX Operation
5 Used to select a signal and send
it to the line and the speaker.
(Level: Soft SW setting)
(When the FAX is installed.) Operation test/
check FAX Operation
6 Used to print the check list of the
contents when confidential
registration is made.
(When the FAX is installed.) Data output/check FAX Data Confidential
pass code
7 Used to print all the images in
the memory.
(When the FAX is installed.) Data output/check FAX Data Image data
8 Used to select a voice message
and send it to the line and the
speaker (at the max. level).
(When the FAX is installed.) Operation test/
check FAX Operation
9 Used to select a signal and send
it to the line and the speaker.
(Level: soft SW setting).
(When the FAX is installed.) Operation test/
check FAX Operation
10 All the images in the memory
can be deleted.
(When the FAX is installed.) Data clear FAX Data Image data
11 Used to select a pattern and
send it to the line and the
speaker at 300bps (at the max.
level).
(When the FAX is installed.) Operation test/
check FAX Operation
12 Used to select a pattern and
send it to the line and the
speaker at 300bps. (Level: soft
SW setting)
(When the FAX is installed.) Operation test/
check FAX Operation
13 Used to register a dial number
for test used in SIM 66-14/15/16.
(When the FAX is installed.) Setting FAX Data Registration
14 Used to adjust and check the
make time of dial pulse (10pps).
(When the FAX is installed.) Adjustment FAX Operation
15 Used to adjust and check the
make time of the dial pulse
(20pps).
(When the FAX is installed.) Adjustment FAX Operation
16 Used to adjust and check the
send level of DTFM signal.
(When the FAX is installed.) Adjustment FAX Operation
17 Used to select the DTFM signal
(1 – 9, 0, *, #) to send it to the
line and the speaker (at the max.
level).
(When the FAX is installed.) Operation test/
check FAX Operation
18 Used to select the DTFM signal
(1 – 9, 0, *, #) to send it to the
line and the speaker (Level: soft
SW setting).
(When the FAX is installed.) Operation test/
check FAX Operation
Code
Function (Purpose) Purpose Section Item
Main Sub