manualshive.com logo in svg

Sharp AR-BC320, Service Manual, Page: 76 / 344

Share
Download
Sharp AR-BC320 Service Manual Download Page 76

AR-BC320  DESCRIPTIONS OF EACH SECTION  7 - 35

3) Remove the front cabinet and the front frame cover.

4) Remove the multi manual paper feed unit.

5) Remove the connection right cabinet, the rear cabinet, and the

rear right cabinet.

6) Remove the screw and the paper feed unit. Remove the con-

nector.

∗

When assembling, fit the positioning pin A with section C.

<5> Paper feed drive motor

1) Remove the screw, the rear cabinet, the rear right cabinet, and

the connection right cabinet B.

2) Remove the screw, and remove the paper feed drive motor.

<6> Paper feed drive unit

1) Remove the harness and the screw, and remove the paper

feed drive unit.

b. Multi manual paper feed

<1> Pickup roller

1) Open the arm cover (A). Disengage the pawl, and remove the

pickup roller (B).

<2> Paper feed roller

1) Open the arm cover (A), open the auxiliary PG (B), and

remove the paper feed roller (C).

<3> Paper separation roller

1) Open the vertical transport guide.

2) Open the maintenance cover (A) from the bottom of the multi

paper feed unit. Disengage the pawl and remove the paper
feed separation roller (B).

A

C

A

B

A

B

C

A

B

Summary of Contents for AR-BC320

























































































































































































































































































































































Reviews:

No comments