manualshive.com logo in svg

Sharp AR-BC320, Service Manual, Page: 62 / 344

Share
Download
Sharp AR-BC320 Service Manual Download Page 62

AR-BC320  DESCRIPTIONS OF EACH SECTION  7 - 21

f. MC cleaner

1) Remove the drum unit.

2) Remove the screw, and remove cover (A).

3) Remove the MC unit.

4) Disengage the pawl, and remove the MC case in the arrow

direction.

5) Remove the screen grid.

6) Disengage the pawl, and remove the MC cleaner.

g. Developing unit removal

1) Open the front cabinet and the left cabinet of the machine.

2) Lift the lever in the arrow direction A, and remove the develop-

ing unit in the arrow direction B.

h. LED unit removal

1) Remove the rear cabinet.

2) Remove the PCU PWB unit.

3) Remove the drum unit.

4) Remove the developing unit.

5) Remove the top cover, and disconnect the connector of the

ICU.

6) Remove the screw (A) on the rear side, and remove the LED

unit.

7) Remove the LED unit.

8) Remove the connector cover and the harness.

i. LED lens cleaning

A

B

C

K

Y

M

A

A

A

A

Summary of Contents for AR-BC320

























































































































































































































































































































































Reviews:

No comments