Sharp AR-BC320, Service Manual, Page: 230 / 344

AR-BC320 SIMULATION 9 - 76
(Printable data)
2. When [Yes] key is pressed, the telephone book data (the one-
touch registration table, the FTP/Desktop expansion table, the
program registration table, the program expansion table, and
the interface memory box registration table) are initialized.
(Press [NO] key to cancel.)
(Checkable sensors)
66 -21
Purpose Check
Function
(Purpose) Used to print various registration information,
communication, file management, system error, and
protocol information. (When the FAX is installed.)
Section FAX
Item Data
Operation/
Procedure 1. Select items to be printed.
2. Press the [EXECUTE] key.
REGISTERED Various registration information
MANAGEMENT Communication management information
FILE MANAGEMENT File management information
SYSTEM ERROR System error information
PROTOCOL Protocol information
66 -22
Purpose Setting
Function
(Purpose) Used to set the sound volume of the handset.
(When the FAX is installed.)
Section FAX
Item Operation
Operation/
Procedure 1. Select the sound volume. (MIN: Minimum,
MIDDLE: Middle, MAX. Maximum)
2. Press the [EXECUTE] key.
66 -23
Purpose Setting
Function
(Purpose) Used to download the FAX program.
(When the FAX is installed.)
Section FAX
Item Operation
Operation/
Procedure 1. Press the [EXECUTE] key.
The FAX program is downloaded.
66 -24
Purpose Data clear
Function
(Purpose) Used to clear the data in the FAST memory.
(When the FAX is installed.)
Section FAX
Item Data Initializing
Operation/
Procedure 1. Press the [EXECUTE] key. (YES/NO key
display)
2. Press [Yes] key to clear the data stored in the
FAST memory. (Press [NO] key to cancel.)
66 -29
Purpose Data clear
Function
(Purpose) Used to clear the data related to the address book
(one-touch registration, program registration/
expansion, interface memory box registration, each
table contents). (When the FAX is installed.)
Section FAX
Item Data Initializing
Operation/
Procedure 1. Press the [EXECUTE] key. (YES/NO key
display)
66 -30
Purpose Operation test/check
Function
(Purpose) Used to check the status change of the TEL/LIU
sensor. (When the FAX is installed.)
Section FAX
Item Operation
Operation/
Procedure Each display is reversed or normalized according to
the status change.
HS1 Polarity reverse signal
HS2 Polarity reverse signal
RHS Handset hook SW
EXHS External telephone hook SW