Sharp AR-BC320, Service Manual, Page: 162 / 344

AR-BC320 SIMULATION 9 - 8
40 1 Used to check the operation of
the manual feed tray paper size
detector and the related circuit.
(The operation of the manual
feed tray paper size detector
can be monitored with the LCD
display.) Operation test/
check Paper feed Operation
2 Used to adjust the manual feed
tray paper width detector
detection level. Adjustment Paper feed Operation
7 Used to enter the adjustment
value of the manual paper feed
tray paper width detector
detection level. (Setting) Setting Paper feed Specifications
41 1 Used to check the operation of
the document size sensor and
the related circuit. (The
operation of the document size
sensor can be monitored with
the LCD display.) Operation test/
check Others Operation
2 Used to adjust the document
size sensor detection level. Adjustment Others Operation
3 Used to check the operation of
the document size sensor and
the related circuit. (The
document size sensor output
level can be monitored with the
LCD display.) Operation test/
check Others Operation
43 1 Used to set the fusing
temperature in each operation
mode. Setting Fixing (Fusing) Operation
44 1 Used to set enable/disable of
correction operations in the
image forming (process) section. Setting Process
(Photoconductor,
developing, transfer,
cleaning) Operation
2 Black image density sensor
adjustment Adjustment Operation
4 Image forming section
correction, image density sensor
adjustment conditions setup Setting Process
(Photoconductor,
development, transfer) Picture quality
6 Used to forcibly execute the
image forming section correction
(high density process correction)
(process correction). Operation test/
check Process
(Photoconductor,
developing, transfer,
cleaning) Operation
9 Used to check the data related
to the image forming section
correction (the corrected main
charger grid voltage in each print
mode, the developing bias
voltage, etc.). (Used to check
that correction is performed
normally or not.) Adjustment/
Setting/Operation
data output, check
(display, print) Process
(Photoconductor,
developing, transfer,
cleaning) Data Operation data
(Machine
conditions)
12 Used to check the sampling
toner image patch density data
in the image forming section
correction (high-density
correction) (process correction).
This simulation allows to check if
the correction operation is
performed normally.) Adjustment/
Setting/Operation
data output, check
(display, print) Process
(Photoconductor,
developing, transfer,
cleaning) Data Operation data
(Machine
conditions)
13 Color image density sensor
adjustment (Adjustment by the
adjustment jig) Adjustment Process (Transfer)
Code
Function (Purpose) Purpose Section Item
Main Sub