Sharp AR-BC320, Service Manual, Page: 105 / 344

AR-BC320 DESCRIPTIONS OF EACH SECTION 7 - 64
3) Remove the resist roller.
• Caution when mounting
When mounting the bearing, insert it while pushing in the direc-
tion of arrow A.
c. Transport section
c-1. Rear cover disassembly
1) Open (A) the document feed cover and (B) the reverse cover.
2) Remove the screws, and remove (C) the rear cover.
c-2. Transport motor disassembly
1) Detach the connector.
2) Remove the screws, and remove (A) the harness guide.
3) Remove the screws, and remove the transport motor unit.
4) Remove the screws, and remove (B) transport motor.
• Caution when mounting
The belt should pass below (C).
d. Document exit section
d-1. Document exit sensor disassembly
1) Raise the RADF main body.
2) Remove the screws, and remove (A) the document exit
bracket.
A
A
B
C
B
A
C
A