manualshive.com logo in svg

Sharp AR-BC320, Service Manual, Page: 24 / 344

Share
Download
Sharp AR-BC320 Service Manual Download Page 24

AR-BC320  UNPACKING AND INSTALLATION  5 - 2

(2) Dust

If dust enters the machine, it may cause dirty copy and a paper
jam, resulting in a shortened lifetime.

(3) Direct rays of the sun

If the machine is installed under the rays of the sun, the exterior of
the machine may be discolored and abnormal copies may be pro-
duced.

(4) Gases and chemicals

Do not install the machine at a place where there are gases and
chemicals. Especially be careful to avoid installation near a diazo-
type copier, which produces ammonium gas.

Copy quality may be adversely affected and a trouble may be
caused.

(5) Vibration

Avoid installation near a machine which produces vibrations.

If vibrations are applied to the copier machine, copy images may
be deflected and a trouble may be caused.

2. Transit and delivery

A. Implements, facility, and manpower

It is recommendable to use a forklift for bringing in the machine for
safety.

If no forklift is available, man-power of four persons is required.
The machine is considerably heavy, and requires safety precau-
tions for delivery and installation.

Transit of the machine must be made in packed condition to the
installing place.

B. Delivery

Remove the packing materials prior to installation in the ofice envi-
ronment.

3. Unpacking

A. Unpacking procedure

1) Remove the PP band.

2) Remove the top case.

3) Remove the internal packing pads and the items packed

together with the machine.

4) Remove the machine from the package.

No.

Content

Method

1

Implements, facility, 
and man power

Use a forklift. (If no forklift is available, 
manpower of four persons is required.)

2

Delivery

Transit must be made in packed 
condition.

Summary of Contents for AR-BC320

























































































































































































































































































































































Reviews:

No comments