Sanyo Denki Sanmotion R 3E S, Instruction Manual, Page: 87 / 514

3.2 Servo motor
3-10
3
Inst
allation
3.2.9 Cable installation considerations
■
Be careful not to apply excessive stress and damages onto cables.
■
When installing cables in the place servo motor can move, take sufficient inflective radius so
as not to apply excessive stress onto cables.
■ Pass cables through the areas where cable insulators shall not be scratched by sharp cutting
debris. Do not pass cables through the areas having possibility that machine corner scrapes
against cables, or personnel/machines may tread on cables.
■
Take measures such as clamp to machines so as not to apply flexion stress and own weight
stress onto each connecting point of cables. When motor and cables need to be transferred
with cableveyor (cable carrier), bending radius of cable shall be determined by referring
required flexion life and wire type.
■
Periodic replaceable structure for movable part of cable is recommended. Please contact us
when you would like to use recommended cables for movable parts.