Sanyo Denki Sanmotion R 3E S, Instruction Manual, Page: 126 / 514

5. Operation
5-3
[Step 2: Check for motor structure]
This shows available motor structure with the servo amplifier. Please confirm that motor
structure code is 00 (rotary motor).
1) By the setup software
Motor structure code is shown in System Information area of Axis property window.
2) By the digital operator
Motor structure code is shown at an upper byte of InFo.1.
[Step 3: Check for main power supply voltage]
This shows applicable input voltage (into R/S/T terminals of CNA or terminal block) with the
servo amplifier. Please confirm that main power supply voltage code is match to your system.
1) By the setup software
Main power supply voltage code is shown in System Information area of Axis property
window.
2) By the digital operator
Main power supply voltage code is shown at a lower byte of InFo.1.
[Step 4: Check for amplifier capacity]
This shows servo amplifier capacity of output current.
Please confirm that the amplifier capacity code is match to combined motor.
1) By the setup software
Amplifier capacity code is shown in System Information area of Axis property window.
2) By the digital operator
Amplifier capacity code is shown at an lower byte of InFo.2.
motor structure code Description
00 Rotary
Motor structure code
Main power supply
voltage code
Description
00 200V AC
01 100V AC
Main power supply voltage code
Amplifier capacity code Description Servo amplifier model number
0D 10A RS3#01A####
0B 20A RS3#02A####
0A 30A RS3#03A####
09 50A RS3A05A####
08 75A RS3A07A####
07 100A RS3A10A####
06 150A RS3A15A####
04 300A RS3A30A####
Amplifier capacity code