Sanyo Denki Sanmotion R 3E S, Instruction Manual, Page: 321 / 514

7.5 Editing parameters
7-14
7
Di
gita
l O
per
at
or
✔
There are three setting ranges of pulse frequency dividing, “1/1 to 1/64,” “2/3 to 2/64,” and
“1/32768 to 32767/32768.”
If you set the figure out of the ranges, the figure is not displayed, the figure before the setting
flashes.
When setting numerator, the figure of denominator is applicable to the figure presently
established.
For example, to change from 1/1 to 2/64, you need to set the denominator first, as the
numerator is already fixed to “1,” and “2/1” is out of the ranges.
✔ “
nu” stands for numerator, “dE” stands for denominator.
Step
Displayed
character,
number, code
Input button How to operate
11
When display flashes 3 times, and then the
flashing stops, the setting of denominator is
completed. If the set value is out of the setting
range, the set value in the step 6 is displayed
without flashing 3 times. When the numerator is
“1,” “1 to 64” or “32768” is settable as the
denominator.
12 Push MODE.
13
“
GrC.04” is displayed.
14 Hold down WR for over a second.
15
“
Gr nu” is displayed.
16 Hold down WR for over a second.
17
Display to be switched, and then rightmost LED
flashes.
The set data are displayed. The display left
shows “1” as nu is set first.
18
Display the figure “2 (numerator)” you want to set
by addition/ subtraction, cursor button.
19 Hold down WR for over a second.
20
When display flashes 3 times, and then the
flashing stops, the setting is completed.
If the set value is out of the setting range, the set
value in the step 13 is displayed without flashing
3 times.
21 Press MODE.
22 Display to be switched to the display left.
MODE
▲
▼
WR/
MODE
▲ ▼
WR/
MODE
▲
▼
WR/
MODE
▲
▼
WR/
MODE
▲
▼
WR/
MODE
▲ ▼
WR/
MODE
▲ ▼
WR/