Sanyo Denki Sanmotion R 3E S, Instruction Manual, Page: 317 / 514

7.4 Status display mode
7-10
7
Di
gita
l O
per
at
or
7.4.8 How to set pass ward
The function that can be used by setting up a password from digital operator can be restricted,
and change of a parameter etc. can be forbidden. The function and the setting method can be
used is the following.
Step
Displayed
character,
number, code
Input button How to operate
1
Make the state of servo amplifier, or the state
where alarm is displayed.
2 Push addition button for more than 1 second.
3
Display switches as the left and the whole
display blinks.
When setup of the password has ended, display
does not blink.
4 Push WR for more than 1 second.
5
Display changes as the left and right end LED
blinks.
6
Display arbitrary numerical values with addition
and subtraction and the cursor button.
0000 and FFFF cannot be set up.
7 Push WR for more than 1 second.
8
Display blinks 3 times, and setup will be
completed if blink stops.
9 Push MODE once.
10 Returns to process 1.
11
Password will become effective if power supply
is turned on again.
Status display
Test Operation
(JOG operation is possible)
Alarm history display
Monitor display
MODE
▲ ▼
WR/
MODE
▲
▼
WR/
MODE
▲ ▼
WR/
MODE
▲
▼
WR/
MODE
▲ ▼
WR/