Sanyo Denki Sanmotion R 3E S, Instruction Manual, Page: 226 / 514

5. Operation
5-103
Group9 List of selection contents
■
Keeping the function always valid or invalid
■
Using function with the generic input signals
■
Activating the functions conditioning the rotational speed of servomotor
Selection Contents
00 Always_Disable Function is always invalid
01 Always_Enable Function is always valid
Selection Contents
02 CONT1_ON Function is valid when generic input, CONT1, is ON
03 CONT1_OFF Function is valid when generic input, CONT1, is OFF
04 CONT2_ON Function is valid when generic input, CONT2, is ON
05 CONT2_OFF Function is valid when generic input, CONT2, is OFF
06 CONT3_ON Function is valid when generic input, CONT3, is ON
07 CONT3_OFF Function is valid when generic input, CONT3, is OFF
08 CONT4_ON Function is valid when generic input, CONT4, is ON
09 CONT4_OFF Function is valid when generic input, CONT4, is OFF
0A CONT5_ON Function is valid when generic input, CONT5, is ON
0B CONT5_OFF Function is valid when generic input, CONT5, is OFF
0C CONT6_ON Function is valid when generic input, CONT6, is ON
0D CONT6_OFF Function is valid when generic input, CONT6, is OFF
0E CONT7_ON Function is valid when generic input, CONT7, is ON
0F CONT7_OFF Function is valid when generic input, CONT7, is OFF
10 CONT8_ON Function is valid when generic input, CONT8, is ON
11 CONT8_OFF Function is valid when generic input, CONT8, is OFF
Selection Contents
12 LOWV_IN
Function is valid while in low speed status
(speed is lower than the LOWV Setting Value).
13 LOWV_OUT
Function is valid while not in low speed status
(speed is lower than the LOWV Setting Value).
14 VA_IN
Function is valid while in speed attainment status
(speed is higher than the VA Setting Value).
15 VA_OUT
Function is valid while not in speed attainment status
(speed is higher than the VA Setting Value).
16 VCMP_IN
Function is valid while in speed matching status
(within command-actual velocity consistent range).
17 VCMP_OUT
Function is valid while not in speed matching status
(within command-actual velocity consistent range).
18 ZV_IN
Function is valid while in zero speed status
(speed is lower than the ZV Setting Value).
19 ZV_OUT
Function is valid while not in zero speed status
(speed is lower than the ZV Setting Value).