Sanyo Denki Sanmotion R 3E S, Instruction Manual, Page: 254 / 514

5. Operation
5-131
■
GroupD "Supporting function related settings"
ID Contents
00
JOG velocity command
[JOGVC]
Setting range Unit Default value
0 to 32767 min -1 50
■
Sets the velocity command value for JOG operation.
 This value will be initial setting value of JOG velocity command in the Setup software.
02
Support function torque limit
[TSTTCLM]
Setting range Unit Default value
10.0 to 500.0 % 120.0
■
Sets the limit value of torque command at the support function (JOG, positioning and homing)
operation.
 This value will be initial setting value of torque command limit for the support function
operation in the Setup software.
10
Serial Communication Axis Number
[COMAXIS] “Power cycle for control after setting” Setting range Unit Default value
01 to 0F - 01:#1
■
Selects axis number when communicating with the setup software.
 Please set different number for each axis when multi axes are connecting at once
because the setup software identifies servo amplifiers by this number.
11
Monitor Display Selection
[MONDISP] Setting range Unit Default value
00 to 77 - 00:STATUS
■
Selects the contents of status display of the digital operator.
Selection Contents
00 STATUS
Shows the status of servo amplifier.
See "5.3 Servo amplifier status display" for details.
01
to
77
WARNING1
to
HBLF Selects the monitor data showing at monitor function.
See "5.5 Monitor function" for details.
Selection Selection Selection Selection Selection
01 #1 04 #4 07 #7 0A #A 0D #D
02 #2 05 #5 08 #8 0B #B 0E #E
03 #3 06 #6 09 #9 0C #C 0F #F