Sanyo Denki Sanmotion R 3E S, Instruction Manual, Page: 154 / 514

5. Operation
5-31
See tables below because display format of ID01 to 07 is different at the setup software and the
digital operator.
■
Display of the setup software
■
Display of the Digital operator
Bit 7 6 5 4 3 2 1 0
0 or 1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1
Bit 7 6 5 4 3 2 1 0
ON
OFF
- LED4 LED3 LED2 LED1
ID Description
05
General input CONT8 to 1 monitor [CONT8-1]
■
Displays generic input terminal status. It will be in a photo coupler excitation state by "1" or "ON".
06
General output OUT8 to 1 monitor [OUT8-1]
■
Displays generic output terminal status. It will be in a photo coupler excitation state by "1" or "ON".
07
Incremental encoder signal monitor [INC-E MON]
■
Displays incremental encoder signal status. "1" or "ON" shows an incoming signal level “H”
state.
Bit 3 2 1 0
Function
---
EN1 encoder
Z-phase signal
EN1 encoder
B-phase signal
EN1 encoder
A-phase signal
Bit 7 6 5 4
Function
---
EN2 encoder
Z-phase signal
EN2 encoder
B-phase signal
EN2 encoder
A-phase signal
Bit 3 2 1 0
Function
CONT4 CONT3 CONT2 CONT1
Bit 7 6 5 4
Function
CONT8 CONT7 CONT6 CONT5
Bit 3 2 1 0
Function
OUT4 OUT3 OUT2 OUT1
Bit 7 6 5 4
Function
OUT8 OUT7 OUT6 OUT5
Digital operator at the front of servo amplifier