Renesas H8S Family, Hardware Manual

Page: 466 / 1230

Section 12 Watchdog Timer (WDT)
Rev. 1.00 Mar. 12, 2008 Page 418 of 1178
REJ09B0403-0100
•
TCSR_1
Bit Bit Name
Initial
Value
R/W Description
7 OVF 0 R/(W) *
1
Overflow Flag
Indicates that TCNT has overflowed (changes from H'FF
to H'00).
[Setting conditions]
•
When TCNT overflows (changes from H'FF to H'00)
•
When internal reset request generation is selected in
watchdog timer mode, OVF is cleared automatically by
the internal reset.
[Clearing conditions]
•
When TCSR is read when OVF = 1 *
2
, then 0 is written
to OVF
•
When 0 is written to TME
6 WT/
IT
0 R/W Timer Mode Select
Selects whether the WDT is used as a watchdog timer or
interval timer.
0: Interval timer mode
1: Watchdog timer mode
5 TME 0 R/W Timer Enable
When this bit is set to 1, TCNT starts counting.
When this bit is cleared, TCNT stops counting and is
initialized to H'00.
4 PSS 0 R/W Prescaler Select
Selects the clock source to be input to TCNT.
0: Counts the divided cycle of
φ
–based prescaler (PSM)
1: Counts the divided cycle of
φ
SUB–based prescaler
(PSS)
3 RST/
NMI
0 R/W Reset or NMI
Selects to request an internal reset or an NMI interrupt
when TCNT has overflowed.
0: An NMI interrupt is requested
1: An internal reset is requested