Error solving manual.
CNC 8060
CNC 8065
·52·
(R
EF
: 1709)
1418
'It is not possible to park axes of the active kinematics or transformation'
DETECTION
During execution.
CAUSE
The CNC has tried to park an axis that is part the active kinematics or transforms #CS,
#ACS, #ANGAX, #TANGCTRL.
SOLUTION
Check the program. To park that axis, cancel the active kinematics or transformation.
1419
'Slaved axes (Gantry or Tandem) cannot be parked.
DETECTION
During execution.
CAUSE
The CNC has tried to park an axis that is part of a gantry, tandem axis or of an active
coupling (#LINK).
SOLUTION
Check the program. To park that axis, cancel the coupling. The axes belonging to a
gantry or tandem pair cannot be parked.
1420
'Open control blocks at the end of the program'
DETECTION
During execution.
CAUSE
Some $IF, $FOR, etc. does not have its corresponding closing instruction.
SOLUTION
Check the program.
1421
'The axes of the active transformation can neither be slaves nor parked'
DETECTION
During execution.
CAUSE
One of the axes involved in the programmed coordinate transformation is parked, is
a slave of a gantry pair or is a slave of an active coupling.
SOLUTION
Unpark, deactivate the active coupling or undo the gantry pair in order to use the axis
in the coordinate transformation.
1422
'#CS ON/#ACS ON: wrong programmed mode'
DETECTION
During execution.
CAUSE
The programmed MODE parameter is wrong.
SOLUTION
The value of the MODE parameter must be between 1 and 6.
1423
'#CS ON/#ACS ON: the parameter of an aligned axis must be 0 or 1'
DETECTION
During execution.
CAUSE
The value programmed as method for aligning the plane is wrong.
SOLUTION
Check the program.
1424
'G function not allowed while MCS is active'
DETECTION
During execution.
CAUSE
The programmed G function cannot be executed while #MCS is active.
SOLUTION
Check the program.
1425
'Block skip is only admitted at the beginning of the line'
DETECTION
During execution.
CAUSE
The "/" character is only admitted at the beginning of the program line.
SOLUTION
Check the program.
1426
'The pocket was resolved with a different tool radius'
DETECTION
During execution.
CAUSE
The CNC generated the pocket with a tool radius other than the current one.
SOLUTION
Generate the pocket again.
1427
'Axis programmed wrong'
DETECTION
During execution.
CAUSE
Syntax error when programming the instruction or G function; some axis is repeated
in a movement, the home searching order for the axes is missing in the G74 function
or the order of the axes in the system is missing in the G20 function.
SOLUTION
Check the program.
1428
'The movement in the main plane must be programmed before the G function of the cycle'
DETECTION
During execution.
CAUSE
The coordinates of the starting point of the cycle are defined after the G function that
defines the cycle. The cycle considers the coordinates of the starting point as its own
parameters.
SOLUTION
Program the coordinates of the axes before the G function of the cycle.
Summary of Contents for 8065
