Fagor 8065, Error Solving Manual

Page: 111 / 220

Error solving manual.
CNC 8060
CNC 8065
·111·
(R
EF
: 1709)
2336 'Programming not allowed outside a G8726 macro'
DETECTION During execution.
CAUSE There is a G8727 or G8728 function programmed outside a G8726 macro.
SOLUTION Check the program. Function G8727 or G8728 must be programmed after the G8726
macro.
2337 'PROGTL3 programing not allowed in an ISO profile'
DETECTION During execution.
CAUSE The profile of the macro is written in two languages, ProGTL3 and ISO.
SOLUTION The profiles of the macros may be defined in either ProGTL3 or ISO language, but
they cannot be combined in the same profile. Program the profile for the macro in one
language only, either ProGTL3 or ISO.
2338 'Section H cannot be programmed'
DETECTION During execution.
CAUSE H can only be programmed in the blocks of the plane profile defined in G8736 or as
parameter of G8737.
SOLUTION Check the program. Do not program H in other blocks.
2339 'The active tool radius compensation and 3D compensation are not compatible with each
other'
DETECTION During execution.
CAUSE The CNC has tried activating tool radius compensation (G41/G42) while 3D tool
compensation (#COMP3D ON) was active or vice versa.
SOLUTION Check the program. The two types of compensation are incompatible with each other.
2340 'Vector defined twice'
DETECTION During execution.
CAUSE 3D tool compensation. Two vectors N[a,b,c] are programmed in the same block.
SOLUTION Check the program. Program a single vector per block.
2341 'Vector programmed wrong'
DETECTION During execution.
CAUSE 3D tool compensation. The vector N[a,b,c] is wrong.
SOLUTION Check the program. Program the three components of the vector.
2342 'The vector N[-,-,-] must be programmed for 3D compensation'
DETECTION During execution.
CAUSE When 3D tool compensation is active, the vector N[a,b,c] is missing in some block.
SOLUTION Check the program. When 3D tool compensation is active, a vector must be
programmed in each motion block.
2343 'Wrong active tool for 3D compensation'
DETECTION During execution.
CAUSE The tool is not flat, toric or spherical.
SOLUTION 3D tool compensation in "NORMAL" mode only admits flat, toric or spherical milling
tools.
2344 'Program #COMP3D ON/OFF [PARAX/NORMAL]'
DETECTION During execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the program.
2345 'Profile defined twice'
DETECTION During execution.
CAUSE More than one plane profile or more than a profile have been defined in a section.
SOLUTION Check the program. Define a single profile
2346 'Too many blocks for 2D display'
DETECTION During execution.
CAUSE Either not enough memory reserved for 2D display of the program or more than 500
blocks.
SOLUTION Modify the program to display it in parts.