Error solving manual.
CNC 8060
CNC 8065
·177·
(R
EF
: 1709)
8270
'Partial loss in function'
DETECTION
During editing.
CAUSE
The argument programmed in the mathematical function is not valid.
SOLUTION
Program a correct argument in the mathematical function (LN, LOG, SQRT, EXP,
DEXP, SIN, COS, TAN, ASIN, ACOS, ATAN).
8271
'Invalid argument in function'
DETECTION
During editing.
CAUSE
The argument programmed in the mathematical function is not valid.
SOLUTION
Program a correct argument in the mathematical function (LN, LOG, SQRT, EXP,
DEXP, SIN, COS, TAN, ASIN, ACOS, ATAN).
8272
'Total loss in function'
DETECTION
During editing.
CAUSE
The argument programmed in the mathematical function is not valid.
SOLUTION
Program a correct argument in the mathematical function (LN, LOG, SQRT, EXP,
DEXP, SIN, COS, TAN, ASIN, ACOS, ATAN).
8273
'Function underflow'
DETECTION
During editing.
CAUSE
The argument programmed in the mathematical function is not valid.
SOLUTION
Program a correct argument in the mathematical function (LN, LOG, SQRT, EXP,
DEXP, SIN, COS, TAN, ASIN, ACOS, ATAN).
8274
'Unknown exception type'
DETECTION
During editing.
CAUSE
The argument programmed in the mathematical function is not valid.
SOLUTION
Program a correct argument in the mathematical function (LN, LOG, SQRT, EXP,
DEXP, SIN, COS, TAN, ASIN, ACOS, ATAN).
8275
'Too many M functions in the same block'
DETECTION
During editing.
CAUSE
Too many M functions in the same block.
SOLUTION
The maximum number of M functions allowed in the same block is 7.
8276
'Too many H functions in the same block'
DETECTION
During editing.
CAUSE
Too many H functions in the same block.
SOLUTION
The maximum number of H functions allowed in the same block is 7.
8279
'Mirror image repeated'
DETECTION
During editing.
CAUSE
Function G11, G12 or G13 has been programmed more than one in the same block.
Function G10 or G14 has been programmed together with function G11, G12 or G13
in the same block.
SOLUTION
Functions G11, G12 and G13 may be combined in the same block, but each of them
can only be programmed once. Functions G10 and G14 cannot be programmed in
the same block as G11, G12 or G13.
8280
'Negative spindle positioning (orienting) speed'
DETECTION
During editing.
CAUSE
A negative spindle speed has been programmed in M19.
SOLUTION
The positioning speed "Sn.POS" must be positive.
8281
'Spindle positioning (orienting) speed programmed twice'
DETECTION
During editing and execution in MDI.
CAUSE
The spindle positioning speed in M19 has been programmed more than once in the
same block.
SOLUTION
Program the spindle positioning speed "Sn.POS" only once.
8282
'Cycle parameter repeated'
DETECTION
During editing.
CAUSE
A canned cycle parameter has been programmed more than once in the block.
SOLUTION
Each canned cycle parameter can only be programmed once in the block.
Summary of Contents for 8065
