Error solving manual.
CNC 8060
CNC 8065
·179·
(R
EF
: 1709)
8300
'G170, G171 and G157 require at least one axis'
DETECTION
During editing.
CAUSE
No axis has been programmed with function G170, G171 or G157.
SOLUTION
Program the axis or axes to be affected by function G170, G171 or G157.
8302
'The minimum X coordinate must be smaller than the maximum'
DETECTION
During editing.
CAUSE
In the #DGWZ instruction, the minimum X coordinate is equal to or greater than the
maximum.
SOLUTION
The minimum coordinate must be smaller than the maximum.
8303
'The minimum Y coordinate must be smaller than the maximum'
DETECTION
During editing.
CAUSE
In the #DGWZ instruction, the minimum Y coordinate is equal to or greater than the
maximum.
SOLUTION
The minimum coordinate must be smaller than the maximum.
8304
'The minimum Z coordinate must be smaller than the maximum'
DETECTION
During editing.
CAUSE
In the #DGWZ instruction, the minimum Z coordinate is equal to or greater than the
maximum.
SOLUTION
The minimum coordinate must be smaller than the maximum.
8306
'G201 requires programming the special function #AXIS'
DETECTION
During editing.
CAUSE
The #AXIS instruction has not been programmed in the same block as function G201.
SOLUTION
Function G201 requires programming the #AXIS instruction in the same block. This
instruction must indicate the axes affected by the G function.
8307
'The third primary axis has been programmed wrong'
DETECTION
During editing.
CAUSE
In the G20 instruction, parameter 5 is the same as parameter 1 or parameter 2.
SOLUTION
Parameter 5 must be different from parameter 1 and parameter 2.
8308
'Expression or K expected after G04'
DETECTION
During editing.
CAUSE
Function G4 programmed wrong.
SOLUTION
Function G4 may be programmed as G4 <time> or G4K<time>, where <time> is the
dwell time.
8309
'Too many axes have been programmed'
DETECTION
During editing.
CAUSE
Too many axes programmed in the '#POLY instruction.
SOLUTION
The maximum number of axes that can be programmed is 3.
8310
'Required parameter missing'
DETECTION
During editing.
CAUSE
A required parameter is missing in the #POLY, #CS, #ACS or #PROBE instruction
SOLUTION
Check the syntax of the instructions in the programming manual.
8311
'Wrong parameter value'
DETECTION
During editing.
CAUSE
Invalid value in an argument of the #CS, #ACS, #HSC or #POLY instruction. Invalid
value for the index of an arithmetic parameter.
SOLUTION
Check the syntax of the instructions in the programming manual. The index of an
arithmetic parameter must always be positive or zero.
8312
'#CS/#ACS: wrong mode'
DETECTION
During editing.
CAUSE
Invalid value for the MODE command of the #CS or #ACS instruction.
SOLUTION
Check the syntax of the instructions in the programming manual.
Summary of Contents for 8065
