Error solving manual.
CNC 8060
CNC 8065
·195·
(R
EF
: 1709)
8495
$WHILE condition
DETECTION
During editing and execution.
CAUSE
The syntax of the instruction is wrong.
SOLUTION
Check the syntax of the instruction in the programming manual.
8496
'$WHILE condition'
DETECTION
During execution.
CAUSE
The syntax of the instruction is wrong.
SOLUTION
Check the syntax of the instruction in the programming manual.
8497
'Wrong K parameter value'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. Wrong K parameter value for the
programmed G function.
SOLUTION
Refer to the 8055 manual for the correct syntax.
8498
'There is one parameter too many'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. There is one parameter too many
in function G24/G27.
SOLUTION
Refer to the 8055 manual for the correct syntax.
8499
'Wrong parameters in function'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. The programmed G function
contains invalid parameters
SOLUTION
Refer to the 8055 manual for the correct syntax.
8502
'The circular interpolation in Polar does not admit a radius'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. Circular interpolation in Polar
coordinates does not admit programming the radius; it only admits the Q parameter.
SOLUTION
Refer to the 8055 manual for the correct syntax.
8503
'The final coordinate of the movement has not yet been programmed'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. The target coordinate of the G8,
G9 or G33 move is missing.
SOLUTION
Refer to the 8055 manual for the correct syntax.
8504
'Wrong number of blocks (0-50)'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. 'Wrong number of blocks in
G41/G42.
SOLUTION
Refer to the 8055 manual for the correct syntax.
8506
'Program only parameter E'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. If the E parameter is programmed
in the G49 function, the function does not admit more parameters.
SOLUTION
Refer to the 8055 manual for the correct syntax.
8507
'Wild card programmed twice'
DETECTION
During editing.
CAUSE
The "?n" wild card has been programmed more than once in the same block.
SOLUTION
Program the wild card only once in the block.
8509
'Wrong wild card number'
DETECTION
During editing.
CAUSE
The number programmed in the "?n" wild card is negative or larger than the number
of axes of the channel.
SOLUTION
The number programmed in the "?n" wild card must be a valid axis number.
Summary of Contents for 8065
