Error solving manual.
CNC 8060
CNC 8065
·87·
(R
EF
: 1709)
1795
'CIRCULAR POCKET: Tool diameter = 0'
DETECTION
During the execution of a cycle.
CAUSE
The radius of the roughing or finishing tool is 0.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1796
'PRE-EMPTIED POCKET: Tool diameter = 0'
DETECTION
During the execution of a cycle.
CAUSE
The radius of the roughing or finishing tool is 0.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1797
'RECTANGULAR BOSS: Tool diameter = 0'
DETECTION
During the execution of a cycle.
CAUSE
The radius of the roughing or finishing tool is 0.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1798
'CIRCULAR BOSS: Tool diameter = 0'
DETECTION
During the execution of a cycle.
CAUSE
The radius of the roughing or finishing tool is 0.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1799
'SURFACE MILLING: Tool diameter = 0'
DETECTION
During the execution of a cycle.
CAUSE
The radius of the roughing or finishing tool is 0.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1800
'SLOT MILLING: Tool diameter = 0'
DETECTION
During the execution of a cycle.
CAUSE
The radius of the roughing or finishing tool is 0.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1801
'RECTANGULAR POCKET: Beta or theta < 0 or Beta or theta > 90'
DETECTION
During the execution of a pocket.
CAUSE
In the pocket cycle, the lateral penetration angle for roughing (parameter
) or for
finishing (parameter
) is not between 0º and 90º.
SOLUTION
Correct the lateral penetration angle; program a value between 0º and 90º.
1802
'CIRCULAR POCKET: Beta or theta < 0 or Beta or theta > 90'
DETECTION
During the execution of a pocket.
CAUSE
In the pocket cycle, the lateral penetration angle for roughing (parameter
) or for
finishing (parameter
) is not between 0º and 90º.
SOLUTION
Correct the lateral penetration angle; program a value between 0º and 90º.
1803
'PRE-EMPTIED POCKET: Beta or theta < 0 or Beta or theta > 90'
DETECTION
During the execution of a pocket.
CAUSE
In the pocket cycle, the lateral penetration angle for roughing (parameter
) or for
finishing (parameter
) is not between 0º and 90º.
SOLUTION
Correct the lateral penetration angle; program a value between 0º and 90º.
1804
'G87: Depth = 0'
DETECTION
During the execution of the cycle.
CAUSE
The resulting depth of the pocket is zero. The programmed depth (parameter I) is the
same as the sum of parameters Z and D; if parameter Z has not been programmed,
the programmed depth (parameter I) is the same as parameter D.
SOLUTION
Correct the programming of parameters I Z D.
1805
'G87: tool diameter greater than the pocket'
DETECTION
During the execution of the cycle.
CAUSE
The tool radius is greater than the dimensions of the pocket (parameters J and/or K).
SOLUTION
Select a tool with a smaller diameter.
1806
'G87: tool diameter smaller than L'
DETECTION
During the execution of the cycle.
CAUSE
The tool diameter is smaller than the finishing stock (parameter L).
SOLUTION
Select a tool with a larger diameter.
Summary of Contents for 8065
