Fagor 8065, Error Solving Manual

Page: 86 / 220

Error solving manual.
CNC 8060
CNC 8065
·86·
(R
EF
: 1709)
1784 'SLOT MILLING: tool diameter smaller than DELTA'
DETECTION During the execution of the cycle.
CAUSE In the roughing or finishing operation, the tool diameter is smaller than the milling pass
(parameter

).
SOLUTION Reduce the milling pass or use a tool with a larger diameter.
1785 'GROOVING: tool diameter greater than the pocket'
DETECTION During the execution of the cycle.
CAUSE In the roughing or finishing operation, the tool diameter is greater than the groove
dimensions (parameter L or H).
SOLUTION Choose a tool with a smaller diameter.
1786 'GROOVING: FINISHING tool diameter smaller than delta'
DETECTION During the execution of the cycle.
CAUSE The diameter of the finishing tool is smaller than the residual stock on the side walls
(parameter

).
SOLUTION Choose a tool of a greater diameter for the finishing pass.
1787 'CIRCULAR POCKET: F = 0'
DETECTION During the execution of the cycle.
CAUSE The value of some F parameter is 0; the feedrate for roughing, finishing or Z-axis
penetration is missing.
SOLUTION Assign a value greater than 0 to the parameter.
1788 'CIRCULAR POCKET: S = 0'
DETECTION During the execution of the cycle.
CAUSE The value of some S parameter is 0; the speed for roughing or finishing is missing.
SOLUTION Assign a value greater than 0 to the parameter.
1789 'CIRCULAR POCKET: T = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter T of roughing and finishing operations is 0. No tool has been
programmed.
SOLUTION Program a tool for roughing or finishing operations. If an operation does not have a
tool, the cycle will not executed it; at least one operation must have a tool.
1790 'CIRCULAR POCKET: P = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter P is 0. No depth has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1791 'CIRCULAR POCKET: tool diameter smaller than DELTA'
DETECTION During the execution of the cycle.
CAUSE In the roughing or finishing operation, the tool diameter is smaller than the milling pass
(parameter

).
SOLUTION Reduce the milling pass or use a tool with a larger diameter.
1792 'CIRCULAR POCKET: tool diameter greater than the pocket'
DETECTION During the execution of the cycle.
CAUSE In the roughing or finishing operation, the tool radius is greater than the pocket radius
(parameter R).
SOLUTION Choose a tool with a smaller diameter.
1793 'CIRCULAR POCKET: Finishing tool diameter smaller than delta'
DETECTION During the execution of the cycle.
CAUSE The diameter of the finishing tool is smaller than the residual stock on the side walls
(parameter

).
SOLUTION Choose a tool of a greater diameter for the finishing pass.
1794 'RECTANGULAR POCKET: Tool diameter = 0'
DETECTION During the execution of a cycle.
CAUSE The radius of the roughing or finishing tool is 0.
SOLUTION Correct the value of the tool radius in the tool table or select another tool.