Fagor 8065, Error Solving Manual

Page: 113 / 220

Error solving manual.
CNC 8060
CNC 8065
·113·
(R
EF
: 1709)
2359 '#DGWZ CYL: The programmed axis must belong to the plane or to the trihedron'
DETECTION During execution.
CAUSE The axis programmed in the instruction #DGWZ does not belong to the plane or to
the trihedron.
SOLUTION Select an axis of the plane or of the trihedron as a longitudinal axis.
2360 'The function or instruction does not allow axis programming'
DETECTION During execution.
CAUSE An axis has been programmed in the function or instruction.
SOLUTION Check the program.
2361 #DGWZ <RECT>: The rotation axis cannot be programmed.
DETECTION During execution.
CAUSE The axis of rotation has been programmed in DGWZ or DGWZ RECT.
SOLUTION A rotation axis can only be programmed for DGWZ CYL. Remove the rotation axis
from the DGWZ or DGWZ RECT programming.
2362 #DGWZ CYL: Rotation axis not programmed.
DETECTION During execution.
CAUSE For DGWZ CYL, it is necessary to program a rotation axis that has not been
programmed.
SOLUTION Program the axis of rotation for DGWZ CYL.
2363 G8/G9: End point of the arc incorrectly programmed.
DETECTION During execution.
CAUSE For functions G8 and G9, the end point of the arc is required.
SOLUTION Angle of the end point of the arc.
2364 End point of non-existent movement.
DETECTION During execution.
CAUSE The coordinate programmed by a Cartesian coordinate and an angle is incorrect. The
tool path beginning from the previous point cannot reach the programmed point.
SOLUTION Correctly program the movement end point.
2365 G34: Dual leadscrew pitch increment/decrement programming.
DETECTION During execution.
CAUSE The increment/decrement of the leadscrew pitch (K1) has been programmed more
than once
SOLUTION Program the leadscrew pitch increment/decrement only once for the block.
2366 G34: Leadscrew pitch increment/decrease equal to zero.
DETECTION During execution.
CAUSE The leadscrew pitch increment/decrement (K1) for G34 is zero.
SOLUTION Program the leadscrew pitch increment/decrement (K1) for G34.
2367 G34: Leadscrew pitch increase/decrease is out of range.
DETECTION During execution.
CAUSE The leadscrew pitch increment/decrement value for G34 is incorrect.
SOLUTION Program a correct leadscrew pitch increment/decrement (K1).
2368 G34: Leadscrew pitch increment/decrease is too large.
DETECTION During execution.
CAUSE A leadscrew pitch increment has been programmed greater than twice the thread
pitch.
SOLUTION Program a correct leadscrew pitch increment (K1).
2369 G34: Negative or zero final ballscrew pitch.
DETECTION During execution.
CAUSE With the leadscrew pitch and the leadscrew pitch decrement programmed for G34,
the final pitch calculated by the control is negative or zero.
SOLUTION Correctly program the pitch and leadscrew pitch decrement for G34