Error solving manual.
CNC 8060
CNC 8065
·210·
(R
EF
: 1709)
E145
ABSIND: Synchronism error at E21A feedback.
E245
ABSIND: Synchronism error at E21B feedback.
E345
ABSIND: Synchronism error at E21C feedback.
E445
ABSIND: Synchronism error at E21D feedback.
Synchronism lost between the Sercos counter and the ABSIND module which may have caused a wrong position
reading. The error may be due to wrong performance of the ABSIND moduel or to a connection problem between the
ABSIND module and the Sercos counter associated with that feedback.
If the problem persists, contact Fagor Automation.
E146
ABSIND: Error reading information at E21A feedback.
E246
ABSIND: Error reading information at E21B feedback.
E346
ABSIND: Error reading information at E21C feedback.
E446
ABSIND: Error reading information at E21D feedback.
It could not read the ABSIND module identification info during system startup. The error may be due to wrong
performance of the ABSIND moduel or to a connection problem between the ABSIND module and the Sercos counter
associated with that feedback.
If the problem persists, contact Fagor Automation.
E183
INDUCTOSYN: INC signal too low at E21A feedback.
E283
INDUCTOSYN: INC signal too low at E21B feedback.
E383
INDUCTOSYN: INC signal too low at E21C feedback.
E483
INDUCTOSYN: INC signal too low at E21D feedback.
Incremental signal level of the inductosyn/resolver feedback device too low. Check the gain and phase values of the
ABSIND module with the adjustment software. Check the cable and the connection between the ABSIND module and
the inductosyn/resolver feedback device. If the error persists and cannot be changed with the previous actions, try
replacing the ABSIND module and/or the cable associated with that feedback. If the error persists, contact Fagor
Automation.
E184
INDUCTOSYN: INC signal too high at E21A feedback.
E284
INDUCTOSYN: INC signal too high at E21B feedback.
E384
INDUCTOSYN: INC signal too high at E21C feedback.
E484
INDUCTOSYN: INC signal too high at E21D feedback.
Incremental signal level of the inductosyn/resolver feedback device too high. Check the gain and phase values of the
ABSIND module with the adjustment software. Check the cable and the connection between the ABSIND module and
the inductosyn/resolver feedback device. If the error persists and cannot be changed with the previous actions, try
replacing the ABSIND module and/or the cable associated with that feedback. If the error persists, contact Fagor
Automation.
E185
INDUCTOSYN: GRAY signal missing at E21A feedback.
E285
INDUCTOSYN: GRAY signal missing at E21B feedback.
E385
INDUCTOSYN: GRAY signal missing at E21C feedback.
E485
INDUCTOSYN: GRAY signal missing at E21D feedback.
GRAY signal level of the inductosyn/resolver feedback device missing. Check the gain and phase values of the ABSIND
module with the adjustment software. Check the cable and the connection between the ABSIND module and the
inductosyn/resolver feedback device. If the error persists and cannot be changed with the previous actions, try replacing
the ABSIND module and/or the cable associated with that feedback. If the error persists, contact Fagor Automation.
E186
INDUCTOSYN: Linear encoder unstable on Power-ON, E21A feedback.
E286
INDUCTOSYN: Linear encoder unstable on Power-ON, E21B feedback.
E386
INDUCTOSYN: Linear encoder unstable on Power-ON, E21C feedback.
E486
INDUCTOSYN: Linear encoder unstable on Power-ON, E21D feedback.
The position read when initializing the ABSIND module is unstable. Check that the axis is not moving while starting up
or initializing. Check the cable and the connection between the ABSIND module and the inductosyn/resolver feedback
device. Check the ground connections in the electrical cabinet (electrical noise on the signals). If the error persists and
cannot be changed with the previous actions, try replacing the ABSIND module and/or the cable associated with that
feedback. If the error persists, contact Fagor Automation.
E187
INDUCTOSYN: Wrong EEPROM checksum, E21A feedback.
E287
INDUCTOSYN: Wrong EEPROM checksum, E21B feedback.
E387
INDUCTOSYN: Wrong EEPROM checksum, E21C feedback.
E487
INDUCTOSYN: Wrong EEPROM checksum, E21D feedback.
Check the gain and phase values of the ABSIND module with the adjustment software. If the error persists and cannot
be changed with the previous actions, try replacing the ABSIND module associated with that feedback. If the error
persists, contact Fagor Automation.
E188
INDUCTOSYN: Unknown error at E21A feedback.
E288
INDUCTOSYN: Unknown error at E21B feedback.
E388
INDUCTOSYN: Unknown error at E21C feedback.
E488
INDUCTOSYN: Unknown error at E21D feedback.
Summary of Contents for 8065
