Error solving manual.
CNC 8060
CNC 8065
·27·
(R
EF
: 1709)
1105
'Assignment operator expected'
DETECTION
During execution.
CAUSE
No assignment operator has been programmed after the variable or parameter.
SOLUTION
The valid assignment operators are "=", "+=", "-=", "*=", "/=".
1106
'"]" expected'
DETECTION
During execution.
CAUSE
The closing bracket "]" is missing in the programmed expression or instruction.
SOLUTION
Check the program.
1107
'The axis does not exist or is not available'
DETECTION
During execution.
CAUSE
The CNC tries to move an axis that does not exist or is not available in the system
or in the channel. The axis programmed in an instruction or variable does not exist
in the system or in the channel.
SOLUTION
Verify that the programmed axis exists in the channel and that it is available (is not
parked).
1108
'Axis programmed twice'
DETECTION
During execution.
CAUSE
In one of the following functions, an axis has been programmed more than once.
• Axis movement in G0, G1, G2, G3, G8 or G9.
• Threading G33 or G63.
• Instructions #FACE or #CYL.
• Plane selection, G20.
With functions that imply axis movements, programming an axis twice may be
because the axis has been programmed in both Cartesian and Polar coordinates.
SOLUTION
Check the program.
1109
'Wrong axis index'
DETECTION
During execution.
CAUSE
In functions G20 and G74, the index programmed with the axis name is wrong.
SOLUTION
The axis index must be between 1 and the maximum number of axes of the system
or channel.
1110
'Values for I, J, K programmed twice'
DETECTION
During execution.
CAUSE
One of parameters I, J, K has been programmed more than once in the same block.
SOLUTION
Check the program.
1111
'Control instructions $ must be programmed alone in the block'
DETECTION
During execution.
CAUSE
An instruction has not been programmed alone in the block.
SOLUTION
Check the program. The instructions must be programmed alone in the block, only
the block label may be added. The only exception is to program $IF and $GOTO in
the same block.
1112
'The $IF instruction <condition> can only be followed by $GOTO'
DETECTION
During execution.
CAUSE
The instruction is not programmed alone in the block and the additional information
is not a $GOTO.
SOLUTION
Check the program. The instructions must be programmed alone in the block, only
the block label may be added. The only exception is to program $IF and $GOTO in
the same block.
1113
'$ELSE not expected'
DETECTION
During execution.
CAUSE
The CNC has detected an $ELSE instruction without a previous $IF instruction.
SOLUTION
Check the program.
1114
'The $ELSE instruction must be programmed alone in the block'
DETECTION
During execution.
CAUSE
The instruction has not been programmed alone in the block.
SOLUTION
Check the program.
Summary of Contents for 8065
