Error solving manual.
CNC 8060
CNC 8065
·103·
(R
EF
: 1709)
2008
'While G138 is active, no G41/G42 change is allowed after the first compensation block'
DETECTION
During execution.
CAUSE
After activating tool radius compensation with the direct method (G138), a change
of compensation type (from G41 to G42 or vice versa) has been programmed before
the first motion block.
SOLUTION
To activate tool radius compensation with the direct method (G138), the CNC needs
an additional block in the plane besides the activation block. The CNC allows
changing the type of tool radius compensation after this movement. If this block
cannot be programmed, use the indirect method (G139) to activate tool radius
compensation.
2009
'Too great a difference between the starting and end radius of the arc'
DETECTION
During execution.
CAUSE
On the programmed arc, the difference between the initial radius and the final radius
is greater than the tolerance allowed.
SOLUTION
Check how the arc has been programmed.
2010
'Tool radius too large when calculating tool radius compensation between arcs'
DETECTION
During execution.
CAUSE
The tool radius is too large for the programmed arc.
SOLUTION
Programmed a smaller tool radius for machining the programmed arc, eliminate the
programmed profile or program a larger arc.
2011
'Compensation movement on circular path (profile damaged)'
DETECTION
During execution.
CAUSE
The tool radius is too large for the programmed arc.
SOLUTION
Programmed a smaller tool radius for machining the programmed arc, eliminate the
programmed profile or program a larger arc.
2013
'Different tool radius between previous path and an arc'
DETECTION
During execution.
CAUSE
When machining an arc while tool radius compensation is active, the tool radius has
changed with respect to the previous block.
SOLUTION
Tool radius compensation being active, do not change the tool radius while executing
an arc.
2016
'The profile has been changed to avoid a collision'
DETECTION
During execution.
CAUSE
The process of detecting collisions during tool compensation has detected a tool path
that would damage the programmed profile and it has eliminated it.
SOLUTION
Depending on the collision detected, it may be solved by using a tool of a smaller
radius, programming the profile in a different way or simply accepting the change
proposed by the collision detecting process.
2017
'Programming not allowed while collision detection is active'
DETECTION
During execution.
CAUSE
The collision detection feature does not admit certain processes like home search,
probing, etc.
SOLUTION
Do not activate collision detection if any of these processes has been programmed.
2051
'Incompatible spline and tangential control have been programmed'
DETECTION
During execution.
CAUSE
The CNC does not allow activating tangential control while the splines are active and
vice versa.
SOLUTION
Deactivate the splines before activating the tangential control and vice versa.
2100
'Positive software limit overrun in G5, G60 or HSC'
DETECTION
During execution.
CAUSE
The path generated by the CNC in G05, G60 or HSC mode is beyond the active travel
limits.
SOLUTION
Check that the programmed path is within the software limits and execute it in G7 or
G50 to avoid overshooting. If necessary, cancel the HSC mode (#HSC OFF).
Summary of Contents for 8065
