Fagor 8065, Error Solving Manual

Page: 65 / 220

Error solving manual.
CNC 8060
CNC 8065
·65·
(R
EF
: 1709)
1554 'The PLC has not recognized the START in a #EXEC instruction'
DETECTION During execution.
CAUSE When giving the order to execute a program in another channel, the PLC must give
the "go ahead" to the program start-up (START) If it doesn't give this go-ahead, it will
issue this error.
SOLUTION Check the PLC program.
1555 'Program #MOVE / #MOVE ABS/ADD/INF[...]'
DETECTION During execution.
CAUSE The syntax of the #MOVE instruction is wrong.
SOLUTION Check the program. Together with the instruction, program one of the commands
ABS/ADD/INF and then the call parameters between square brackets.
1556 'Program type of link: PRESENT, NEXT, NULL, WAITINPOS'
DETECTION During execution.
CAUSE In the #MOVE instruction, the type of transition between movements is wrong.
SOLUTION Check the program.
1557 'Program #CAM ON/OFF/SELECT/DESELECT[...]'
DETECTION During execution.
CAUSE The syntax of the #CAM instruction is wrong.
SOLUTION Check the program. Together with the instruction, program one of the commands ON,
OFF, SELECT or DESELECT and then the call parameters between square brackets.
1558 'Wrong cam number'
DETECTION During execution.
CAUSE In the #CAM instruction, the cam number is wrong.
SOLUTION The cam number must be between 1 and NLEVAS.
1559 'Program type of cam: ONCE or CONT'
DETECTION During execution.
CAUSE In the #CAM instruction, the cam type is wrong; the cam type is defined with the
commands ONCE (non-periodic cam) and CONT (periodic cam).
SOLUTION Check the program.
1560 'Program #FOLLOW ON/OFF[...]'
DETECTION During execution.
CAUSE The syntax of the #FOLLOW instruction is wrong.
SOLUTION Check the program. Together with the instruction, program one of the commands
ON/OFF and then the call parameters between square brackets.
1561 'Invalid master axis'
DETECTION During execution.
CAUSE In the #CAM or #FOLLOW instruction, the master axis is wrong.
SOLUTION The axis must belong to the channel.
1562 'Invalid slave axis'
DETECTION During execution.
CAUSE In the #CAM or #FOLLOW instruction, the slave axis is wrong.
SOLUTION The axis must belong to the channel.
1563 'Function G74 must be programmed with axes or alone in the block'
DETECTION During execution.
CAUSE Function G74 has been programmed wrong.
SOLUTION Function G74 may be programmed either with the axes to be homed or alone in the
block. If function G74 is programmed alone in the block, the CNC executes its
associated subroutine (parameter REFPSUB).
1564 'A parked axis cannot be programmed'
DETECTION During execution.
CAUSE The programmed instruction cannot be executed on a parked axis.
SOLUTION Check the program.