Error solving manual.
CNC 8060
CNC 8065
·189·
(R
EF
: 1709)
8423
'#OSC axis1 axis2 ...'
DETECTION
During execution.
CAUSE
The syntax of the instruction is wrong.
SOLUTION
Check the syntax of the instruction in the programming manual.
8424
'#CLEAR<[mark, ...]>'
DETECTION
During execution.
CAUSE
The syntax of the instruction is wrong.
SOLUTION
Check the syntax of the instruction in the programming manual.
8425
'#HSC OFF'
DETECTION
During execution.
CAUSE
The syntax of the instruction is wrong.
SOLUTION
Check the syntax of the instruction in the programming manual.
8426
'#DEF "macro1" = "text1" "macro2" = "text2" ...'
DETECTION
During execution.
CAUSE
The syntax of the instruction is wrong.
SOLUTION
Check the syntax of the instruction in the programming manual.
8427
'Parameter FIRST/SECOND not allowed in this MODE'
DETECTION
During editing.
CAUSE
In the #CS and #ACS instructions, the FIRST and SECOND commands can only be
programmed in MODE 6.
SOLUTION
Check the syntax of the instructions in the programming manual.
8428
'(ERROR <integer> <,"text">)
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION
Refer to the 8055 manual for the correct syntax.
8429
'(MSG "text")'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION
Refer to the 8055 manual for the correct syntax.
8430
''(DGWZ expresión1, expresión2, expresión3, expresión4 <,expresión5, expresión6>)'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION
Refer to the 8055 manual for the correct syntax.
8431
'(ESBLK/DSBLK)'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. Instructions ESBLK/DSBLK are not
alone in the block, or one of them has not been programmed.
SOLUTION
Refer to the 8055 manual for the correct syntax. Both instructions must be
programmed alone and together in the block.
8432
'(ESTOP/DSTOP)'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. Instructions ESTOP/DSTOP are
not alone in the block, or one of them has not been programmed.
SOLUTION
Refer to the 8055 manual for the correct syntax. Both instructions must be
programmed alone and together in the block.
8433
'(EFHOLD/DFHOLD)'
DETECTION
During editing.
CAUSE
Error when programming in 8055 CNC language. Instructions EFHOLD/DFHOLD
are not alone in the block, or one of them has not been programmed.
SOLUTION
Refer to the 8055 manual for the correct syntax. Both instructions must be
programmed alone and together in the block.
Summary of Contents for 8065
